Hammered Dulcimers Are Fun to Build! Learn How to Make One Today!

ArdiesPhotoLogo202Hammered Dulcimer

Hardware Supplies For A Dulcimer Builder's Do-It-Yourself Guidebook!
Copyright 2002-2004. All Rights Reserved.

Order Basic Builder Hardware Supplies for Your Hammered Dulcimer Project! Use the Convenience of Credit Card or Check! These are the same supplies used by Ardie's Handcrafted Dulcimers to build our own hammered dulcimers, so there is no scrimping on quality here.

On this page: Tuning Pins, Hitch Pins, Drill Bits, Tuning Lever, Delrin Rod, Tuners, Tuning Clip

Tuning Pins for hammered dulcimer

Package of 100 Tuning Pins .198" x 1 5/8"

Price: $32.50

Shipping: $6.50 for first package + $1.50 for each additional package.

These high quality tuning pins are wider and longer than those sold by other suppliers, giving them better holding power. Perfect size for the No. 15 drill bit! Bright Steel Finish!

Tuning pin for hammered dulcimer

Tuning Pins (each) .198" x 1 5/8"

Price: $.40 ea.

Shipping: $2.50 + $.03 per pin

Don't need 100? Then buy as only many as you need!

Drill bit for hammered dulcimer tuning pins


No. 15 Drill Bit

Price: $4.35

Shipping: $1.00

This No. 15 Drill Bit is the perfect size for the .198" Tuning Pin. This drill bit is 3 3/8" long, and is otherwise known as a No. 15 Wire Gauge Drill Bit.

 

Hitch pins for hammered dulcimer

Package of 100 Hitch Pins .146" x 1 1/2"

Price: $23.50

Shipping: $4.50 for first package, plus $1.50 for each additional package.

A package of 100 hitch pins. These hitch pins are wider and longer than those sold by other suppliers, giving them better holding power! Perfect size for the No. 27 drill bit. Nickel plated!

Hitch pin for hammered dulcimer

Hitch Pins (each) .146" x 1 1/2"

Price: $.26

Shipping: $2.50 + $.02 per pin

Don't need 100? Individual hitch pins. These hitch pins are wider and longer than those sold by other suppliers, giving them better holding power! Perfect size for the No. 27 drill bit. Nickel plated!

Drill bit for hammered dulcimer hitch pins


No. 27 Drill Bit

Price: $4.15

Shipping: $1.00

This No. 27 Drill Bit is the perfect size for the .146" Hitch Pin. This drill bit is 3 3/8" long, and is otherwise known as a No. 27 Wire Gauge Drill Bit.

 

Tuning Lever for hammered dulcimer


"T" Tuning Lever

Price: $16.50

Shipping: $4.00 for first lever, plus $.75 for each additional lever.

This is the right size "T" Tuning Lever for the .198" Tuning Pins. Star-pattern hole for a good fit.

Delrin Rod for Hammered Dulcimer

Black 1/8" Delrin Rod (per foot) 

Price: $1.10

Shipping: $2.00

We sell black 1/8" delrin rod by the foot! Perfect for the bridges on your hammered dulcimer. After clicking the "Buy" button, you can indicate the number of feet in the Quantity (QTY) field.

 

 

E-mail this page to a friend!

Payment Information

Use the convenience of credit cards through PayPal. No PayPal account required! Read about the benefits of using PayPal.

International Customers Click Here!

PayPal Security     PayPal automatically encrypts your confidential information in transit from your computer to theirs using the Secure Sockets Layer protocol (SSL) with an encryption key length of 128-bits (the highest level commercially available). Before you even register or log in to PayPal, their server checks that you're using an approved browser - one that uses SSL 3.0 or higher.

Ardie's Handcrafted Hammered Dulcimers is a manufacturer of handcrafted hammer dulcimers and accessories, located in Arlington, Texas -- the center of the Dallas/Ft. Worth Metroplex. Ardie learned his craft from Dana Hamilton, a master hammer dulcimer player and maker.

Ardie's Handcrafted Dulcimers  1504 Frontier Dr.   Arlington   Texas   76012
©2005. Ardie's Handcrafted Dulcimers. All Rights Reserved

Web Design by GRDavis Media Services